Izdelki za vzhodna os 5mm 300 (4)

The models of the xiB-64 series with selected Luxima, CMOSIS and GPixel sensors. - The xiB-64 cameras stream images to the host computer via 8 lanes on a PCI Express Gen3 bus, boasting a 64 Gbit/s sustainable transfer rate. Due to the underlying technology, there is no additional latency and hardly any CPU load.This series does not compromise and is extremely useful where the highest data rates are required, either for simultaneous speed, bit depth, and resolution or for extremely high frame rates. It features high-speed sensors (1.3 Mpix at > 3500 FPS) all the way to ultra high-res sensors with unmatched framerates (65 Mpix at 72 FPS). An integrated 4 GB buffer ensures that no frames are dropped. The cameras can be fully synchronized with their multiple GPIOs. The active EF lens mount adapter enables the combination with a wide array of superb optics, the use of optical fiber cables allows distances up to 100 m between cameras and host computer without any performance penalty and even 300 m with reductions in frame rate.

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip Also available as spray version OKS 3521 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 352 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3521 on evenly. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-10 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):270 mm²/s Four-ball test rig (welding load):2,400 N

Zur rechtwinkligen Verbindung von drei Aluminiumprofilen. Material:GD-ZN Farbe/Oberfläche:schwarz Gewicht:0,092 kg Nut:8

Die pco.edge 3.1 als Einstieg in die sCMOS-Welt liefert mit ihrer innovativen scientific CMOS-Technologie gestochen scharfe Bilder und präzise Messergebnisse. PCOs edge 3.1 ist für Anwender konzipiert, die eine gute Auflösung, einen 16 Bit Messbereich, eine gute Quanteneffizienz, ein sehr niedriges Ausleserauschen oder auch wählbare Shutteroptionen benötigen. Merkmale: - gekühlter Sensor: Temperaturstabilisierung bei +5 °C - extrem niedriges Ausleserauschen 1.1 e- med - hohe Auflösung von 2048 x 1536 Pixel - dynamischer Bereich 27 000 : 1 - Quantenwirkungsgrad bis zu 60 % - Rolling Shutter: 500 µs bis 2 s - Global Shutter: 20 µs bis 100 ms - Global Reset: 30 µs - 2 s - maximale Bildrate: 50 Bilder/s - USB 3.0 Schnittstelle - ultrakompaktes Gehäuse: 102 x 79 x 70 mm